Tube laser in operation, cutting rectangular profiles

20×20–240×240 mm · Bevel cut

Tube cutting up to 240×240 mm.

Tube laser for rectangular sections. Round sections on request. Parts ready for assembly.

01 · Function

What it is used for.

Parts ready for assembly, without secondary setup.

Tube section cut with a tube laser, with holes and notches ready for assembly

Where holes, notches, or cuts are required on a tube or profile, tube laser cutting replaces successive manual operations with a single step. The final part is ready for assembly, without deburring, without secondary setup.

We also offer bevel tube laser for angular edge cutting, as a separate capability. It prepares the joint for welding without a second milling pass.

  • Frames and structures for equipment
  • Structural components for industrial applications
  • Components for furniture and shop fittings
  • Custom mechanical components
02 · Range

20×20 to 240×240 mm.

Five indicative cross-sections, from the smallest we undertake to the largest.

Cross-section diagram: 20×20, 60×60, 100×100, 160×160 and 240×240 mm in size order

For round sections or unusual geometries, please specify in the RFQ form; we evaluate on a case-by-case basis.

03 · Specifications

What we commit to in numbers.

Sections, thicknesses, lengths, functions in one pass.

Sections
20×20–240×240 mm
Rectangular. Round on request.
Wall thicknesses
0.8–6 mm
Typical range for steel and stainless steel.
Lengths
Up to 6500 mm
Tube or profile in one piece.
Functions
Cutting · Holes · Notches · Bevel
All in one pass, without secondary setup.
04 · Two Methods

Cutting and bevel cut.

Conventional cutting for fitting. Bevel for weld preparation.

01 · Conventional

Cutting and holes.

Cut to length, holes for screwing, notches for assembly. All in one pass from the same machine.

  • SectionUp to 240×240 mm
  • FunctionsCut · holes · notches
  • Application fieldFrames, structures
  • BenefitOne setup per design
02 · Bevel cut

Joint preparation.

Angular edge cutting for welding. Eliminates deburring and secondary milling pass.

  • AngleUp to ±45°
  • FunctionsCut + bevel
  • Application fieldWelded constructions
  • BenefitNo secondary pass
05 · Applications

Where tube cutting is applied.

Four typical categories of parts in our production.

01 · Frames

Equipment structures.

Cabinets, bases, and machine frames with fittings ready from cutting.

02 · Structural

Structural components.

Industrial constructions requiring mechanical support and bevel joints.

03 · Furniture

Shops, furniture.

Decorative and technical frames for commercial spaces.

04 · Custom

Mechanical components.

Custom-made parts with complex geometries or intricate notches.

06 · Materials

Materials, finish, process.

Same workflow for tube and profile.

Materials

Steel, Inox 304/316L, aluminium, galvanized steel

Finish

Electrostatic powder coating in RAL, cold galvanising, raw

Production

Laser cutting, tube cutting, bending, welding, all in the same factory

Tube Cutting · next step

Tube and profiles for cutting? Send us your design.

Rectangular 20×20 to 240×240 mm. Bevel cut available. We will get back to you with lead time and price.

Request a quoteor call +30 2310 705572